Video Link on the Bottom
First clean the ear where you intend to apply the strip *Very Well* with alcohol so that no oils or dirt are present. Then coat the inside of the ear, where you intend to apply the strip or strips and the back side of the breath right strip (sticky side) with skin bond glue, wait 1 or 2 min. and then stretch the skin and the crease you are fixing, as tight as possible and apply the sticky side directly to the clean skin, with the center of the breath right strip over the crease in the ear in which you are fixing: hold firmly in place for 30-60 seconds.
For a lower ear crease that does not require much support, the strip should be almost centered on the crease of the ear, slightly more of the strip should be below the crease of the ear.
A lower ear crease that requires more support will require more strips. The upper strip is above the crease line while the two lower strips are positioned as previously described in 'a lower ear crease that does Not require much support'.
The breath right ear strips method works best on ears that already stand from the base on their own, but that 'flop' from the mid-point of the ear or up.
This is a video for a visual:
Reference: